Connecting To The Raid Controller Using A Board-To-Board Connector (Daughtercard) - LSI iBBU01 User Manual

2.3.1 Connecting to the RAID Controller Using a Board-to-Board
Connector (Daughtercard)
2-18
•
Mode 2: The iBBU06 supports remote connection to the following
SAS RAID controller using a 12-inch cable:
– MegaRAID SAS 8708EM2
– MegaRAID SAS 8704EM2
Figure 2.11 displays the top view and the bottom view of the card. (The
"top" side is the side you can see after you install the iBBU06 on the
RAID controller.) Note that this unit combines a battery pack with a
daughtercard.
Figure 2.11 LSIiBBU06 and Components
3
2
4
– 1 - J4 Battery Pack Harness Connector
– 2 - J5 Board-to-board Connector
– 3 - J2 Connector
Installing the Battery Backup Units
Copyright © 2006-2009 by LSI Corporation. All rights reserved.
LSIiBBU06 (bottom view)
J2
J5
LSIiBBU06 (top view)
J4
1
85024-00