Display Bbu Capacity Information - LSI iBBU01 User Manual

Table 3.2 Display BBU Status Information (Cont.)
Description Displays complete information about the BBU status, such as the temperature and
voltage. The information displays in the following formats:
BBU Status for controller: xx
Battery Type: XXXXXX(string)
Voltage: xx mV
Current: xx mA
Temperature: xx C°
Firmware Status: xx
Battery state: xx
Gas Gauge Status:
Fully Discharged: Yes/No
Fully Charged: Yes/No
Discharging: Yes/No
Initialized: Yes/No
Remaining Time Alarm: Yes/No
Remaining Capacity Alarm: Yes/No
Discharge Terminated: Yes/No
Over Temperature: Yes/No
Charging Terminated: Yes/No
Over Charged: Yes/No
Additional status information displays differently for iBBU and BBU.
For iBBU:
Relative State of Charge: xx
Charger System State: xx
Charger System Ctrl: xx
Charging Current: xx mA
Absolute State of Charge: xx%
Max Error: xx%
For BBU:
Relative State of Charge: xx
Charger Status: xx
Remaining Capacity: xx mAh
Full Charge Capacity: mAh
isSOHGood: Yes/No
3.1.2.3 Display BBU Capacity
Table 3.3

Display BBU Capacity Information

Convention
CmdTool -AdpBbuCmd -GetBbuCapacityInfo –aN|-a0,1,2|-aALL
Use the command in
selected controller(s).
Copyright © 2006-2009 by LSI Corporation. All rights reserved.
Table 3.3 to display the BBU capacity for the
3-7