A&D BA-T Series Instruction Manual page 69

Recipe registration example
The following are used for this recipe registration example.
Recipe name
Target value unit
Solution volume
Step 1. Press the Go to the recipe list button on the [HPLC
mode] screen to display the [Recipe list] screen.
Step 2. On the [Recipe list] screen, touch and select the line
with the number to which the recipe will be registered.
In the example, the first line is selected for registration.
After selecting the recipe to be registered, press the
Edit button to display the [Recipe edit] screen in step 3.
Step 3. Enter the recipe name. In the example, the recipe name is
set to "PBS (-)", the buffer volume is set to 1.000 L, and the
target value unit is set to mmol/L. After setting, press the
Edit button to display the [Sample edit] screen in step 4.
Step 4. Select the sample to be registered using the Selection
button in the [Molecular formula] field. To select a sample
other than the one registered at the time of shipment from
the factory, the sample needs to be added to the Selection
button . In this case, press the Add sample button to go to
the [Sample registration] screen in step 5.
In this example, potassium chloride is newly registered.
Press the Add sample button to go to step 5.
If a sample does not need to be added, proceed to step 6.
Selection button in the [Molecular formula] field
PBS(-)
mmol/L Disodium hydrogen phosphate
1 L Potassium dihydrogen phosphate
Sodium chloride
Potassium chloride
Press the Go to the recipe list button
Press the Edit button
Enter the recipe name
Enter the solution volume
Specify the target value unit
Press the Edit button
Press the Add sample button
Sample name
69
Target value Tolerance
10.000 mmol/L 10.000 %
2.000 mmol/L 10.000 %
137.000 mmol/L 10.000 %
2.680 mmol/L 10.000 %