A&D BA-T Series Instruction Manual page 57

Step 5. Enter the [Sample name] and [Details] to be registered.
The figure on the right shows an input example on the
[Sample registration] screen. After inputting, press the
Back button to display the [Sample edit] screen.
Enter the fields then press the Back button
Step 6. Register the first sample in the recipe. Select the desired
sample using the Selection button, and then enter
values in the [Target value] and [Tolerance] fields.
In the example, the sample name is Sample1, the target
value is 1.000000 g, and the tolerance is 10.000%.
After inputting, press the right arrow button
bottom right of the screen to display the registration
screen for the second sample.
The right arrow button
Step 7. Register the second sample in the recipe.
Enter values in the [Target value] and [Tolerance] fields.
Then, press the Register button to register the recipe
and display the [Recipe edit] screen.
In the example, the sample name is Sample2, the target
value is 1.000000 g, and the tolerance is 10.000%.
Caution
If the Back button, ON:OFF key
, LOG-IN key
pressed to display another screen, the sample is not
registered in the recipe.
Step 8. Now the recipe registration is complete.
To start measurement with the registered recipe,
press the Measure button on the [Recipe edit]
screen.
To register another recipe, press the Back button on
the [Recipe edit] screen to display the [Recipe list]
screen, and then repeat from Step 2 to register the
recipe.
displays the registration screen for the next sample.
Press the Register button
, or MENU key
at the
, HOME key
is
57