A&D BA-T Series Instruction Manual page 53

Sample weighing screen
Display settings: HOME key
Application selection button
HOME key
[Formulation mode - Sample weighing] screen
1
2
3
4
Name
1 Sample name display
2 Target value display
Back button
3
SAVE button
4
Warning display for
5
weighing value
6 Tolerance display
To cancel the measurement, press the HOME key
APP button
Select [Formulation mode]
[Formulation mode] screen
Displays the name of the sample to be weighed.
Displays the target value of the registered sample.
Reweighs the tare of the sample currently being measured.
For the first sample, the [Formulation mode] screen will be displayed.
For samples other than the first, the [5.6.7. Tare weighing screen] will be
displayed.
Records the weighing value of the desired sample.
Pressing the SAVE button
The SAVE button
within the allowable range.
Allowable range: |(Weighing value) - (Target value)|
If the next sample is registered in the recipe, pressing the SAVE button
displays the [Formulation mode - Tare weighing] screen.
If it is the last sample, pressing the SAVE button
[Formulation mode results] screen.
Displayed with the stability indicator lit when the weighing value is stable
while it is out of the allowable range.
If the weighing value exceeds the allowable range, the message [Above
tolerance] is displayed.
If the weighing value is below the allowable range, the message [Below
Tolerance] is displayed.
Displays the tolerance for the registered sample.
The tolerance is registered as a ratio (%) to the target value and displayed as
the value converted to the unit of measure (g).
[Application] settings screen
Skip button
Description
applies re-zeroing.
is enabled when the weighing value stabilizes
.
53
(or SAVE button
)
5
6
(Tolerance)
displays the