A&D BA-T Series Instruction Manual page 67

Tare weighing screen
Display settings: HOME key
Application selection button
HOME key
[HPLC mode - Tare weighing] screen
1 SAVE button
2 Skip button
Name
1 SAVE button
2 Skip button
If the tare weight plus sample target value exceeds the capacity, the message "Overload error" is displayed
for the item indicated by
Measurement results screen
Display settings: HOME key
Application selection button
HOME key
SAVE button
1 Measurement results
2 Back button
Name
1 Measurement results
Back button
2
PRINT button
3
APP button
[HPLC mode] screen
Weighs the tare value and displays the [HPLC mode - Sample weighing] screen.
If the recipe is incomplete, the SAVE button
If the weighing value is negative, it is recorded as 0 g.
Skips tare weighing and displays the [HPLC mode - Sample weighing] screen.
If the recipe is incomplete, the button is disabled.
3 in the figure above and the SAVE button
APP button
[HPLC mode] screen
[HPLC mode results] screen
Displays measurement results. If you press the Skip button
sample, the tare weight field of the sample will be blank. If you press the
Skip button
displayed.
Displays the [HPLC mode] screen.
Outputs the measurement results to a device connected to the balance.
[Application] settings screen
Select [HPLC mode]
SAVE button
Description
[Application] settings screen
Select [HPLC mode]
Skip button
Description
for every sample, the tare weight column will not be
67
3 Message display
is disabled.
is disabled.
(or SAVE button
3 PRINT button
for a
)