A&D BA-T Series Instruction Manual page 11

Assembly and installation
The BA-6TE is used here for the example of assembly. Other models can be assembled in the same
way.
Step 1. Pull out the breeze break
locking handles.
Step 2. Place the breeze break unit on
the weighing unit.
Step 3. Push in the breeze break locking
handles to secure the units to each
other.
Step 4. Assemble the weighing pan.
For BA-6TE / BA-6DTE, assemble
the five parts of the weighing pan in
the correct position by referring to
the cross-sectional view.
In addition to the standard weighing pan (Pan
A), you can also use the weighing
pan for filters. The weighing pan for
filters is approximately 0.2 g heavier
than the standard weighing pan
(Pan A). Therefore, the weighing
capacity when the weighing pan for
filters is used will be approximately
6.0 g.
For BA-225TE / BA-225DTE /
BA-125DTE, assemble the four
parts of the weighing pan in the
correct position by referring to the
cross-sectional view.
Weighing pan
for filters
Step 1.
Step 3.
Step 2.
Weighing unit
For BA-225TE / BA-225DTE / BA-125DTE
For BA-6TE / BA-6DTE
Pan A
Cross-sectional views
BA-6TE / BA-6DTE
BA-225TE / BA-225DTE / BA-125DTE
11
Breeze break unit
Weighing pan Pan A
for filters
Pan support A
Breeze
break ring A
Dust plate A
Breeze break
bottom plate
Cross-sectional view
Pan B
Breeze break
ring B
Dust plate B