A&D BA-T Series Instruction Manual page 47

Formulation function
Formulation function usage
This is the function to store a recipe consisting of the sample to be weighed, the target weight, and the
tolerance of the amount to be weighed with the balance, and to weigh according to the recipe.
If you configure this display, the HOME screen changes to formulation mode.
Caution
The contents of the stored recipes and sample information will be cleared by initializing the balance.
Display settings: HOME key
Application selection button
HOME key
1
2
3
4
Name
1 Formulation mode
Go to the recipe list
2
button
Skip button
3
SAVE button
4
Display indicating that
5
the recipe is incomplete
This is the screen for [Formulation mode]. This mode can be used only with the unit "g".
Re-zero will be applied automatically when the screen changes to [Formulation mode].
If the tare weight plus sample target value exceeds the capacity, the message "Overload error" is displayed
for the item indicated by
APP button
[Formulation mode] screen
Displayed when in the formulation mode.
Displays the [Recipe list] screen.
The name of the currently selected recipe is displayed here.
Skips tare weighing and displays the [Formulation mode - Sample weighing]
screen.
If the recipe is incomplete, the button is disabled.
Weighs the tare value and displays the [Formulation mode - Sample weighing]
screen.
If the recipe is incomplete, the SAVE button
If the weighing value is negative, it is recorded as 0 g.
If the selected recipe is incomplete:
The message "The recipe is incomplete. Please check the recipe details." is
displayed and the Skip button
Check the recipe name and the target value and tolerance of the sample
registered in the recipe.
If the selected recipe is complete:
The message "Please place item to be tared" is displayed and the Skip button
and SAVE button
5 in the figure above and the SAVE button
[Application] settings screen
Select [Formulation mode]
Description
and SAVE button
are enabled.
47
5
is disabled.
are disabled.
is disabled.