14. Underhook
The built-in underhook is used for underhook weighing such as measurement of magnetic materials and
the like.
To use the underhook, open the cap on the bottom of the balance.
Caution
Do not apply excessive force to the underhook part.
Do not open the cap unless necessary. (For protection from dust)
The underhook can be used only in the hanging direction (pulling direction).
If the balance is tilted greatly, attached parts such as the weighing pan will come off. Remove them
before work.
Keep in mind that draft enters the balance easily when the underhook cap is removed, affecting the
weighing values.
Usage
Step 1. Remove the bottom cover of the balance.
The underhook can be seen.
Step 2. Hang the weighing pan from the underhook
by using a line.
Step 3. Place the balance on a sturdy table with a
hole.
Sturdy table with a hole
Example of underhook weighing pan
Underhook (Hole diameter: approx. 4 mm)
Cap
107
101
167