A&D BA-T Series Instruction Manual page 216

Peripherals
AD-1671: Anti-vibration table for balances
This anti-vibration table with a weight of approx. 27 kg and cushioning rubber
reduces vibration from the floor and stabilizes the balance's weighing display.
AD-1684A: Electrostatic field meter
Measures the electrostatic charge of measured objects, or the peripheral equipment
such as a container or breeze break for the balance (on automated measuring lines
and the like) and displays the measurement result. The charged static electricity can
be eliminated by using the ionizer.
AD-1687: Environment logger
A data logger equipped with four sensors for temperature, humidity, barometric
pressure and vibration that can measure and store environmental data
When connected to the RS-232C interface of the balance, the AD-1687 can store
environmental data along with weighing data.
AD-1688: Weighing data logger
When connected to the RS-232C interface of the balance, the AD-1688 can store the
data.
Convenient for recording data in places where a personal computer cannot be used.
AD-1689: Tweezers for sensitivity adjustment weight
A pair of tweezers ideally suited for holding sensitivity adjustment
weights of 1 g to 500 g.
AD-8922A: Remote controller
Can be connected to the balance via the RS-232C interface to remotely
turn display on/off, adjust sensitivity, output data, switch display, switch
unit, re-zero, etc.
Optional BCD output, comparator output, and analog output are available.
AD-8127: Multi-functional compact printer
Small dot impact printer that connects with the balance via the RS-232C
interface.
Receives and prints data output from the balance in dump printing mode.
AD-8529PC-W: Bluetooth converter (for a personal computer connection)
Enables wireless communication between a balance and a personal computer
via Bluetooth up to 10 m.
Driver installation is required.
AD-8529PR-W: Bluetooth converter (for a printer connection)
Enables wireless communication between a balance and a printer via
Bluetooth up to 10 m.
216