A&D BA-T Series Instruction Manual page 51

Editing a sample
Display settings: HOME key
Application selection button
HOME key
Select the recipe
Pressing the Edit button on the [Recipe edit] screen displays the [Sample edit] screen.
1 Sample name field
Selection button
2 Target value
3 Tolerance
4 Back button
5 Add sample button
Name
[Sample name]
1 field, Selection
button
2 Target value
3 Tolerance
Back button
4
Add sample
5
button
6 Sample No.
Register button
7
When a sample is selected in the [Sample name] field (1), the input fields for Target value (2) and
Tolerance (3) are enabled.
Pressing the ON:OFF key
another screen, discards the edited contents, and restores to the state before editing.
APP button
[Formulation mode] screen
Edit button
Setting value
(setting range)
Select the sample to be registered from the Selection button.
Initially this field is blank. You can add samples on the [Sample
―
registration] screen.
Details are displayed below the Selection button.
Balance readability ~
Set the target value to be weighed for the selected sample.
Weighing capacity
Set the tolerance for the target value to be weighed.
0.001 ~ 100.000
Zero cannot be set for the tolerance.
Displays the [Recipe edit] screen.
― The edited contents are discarded and the state before editing is
restored.
― Displays the [Sample registration] screen.
Displays the current sample number. Touching the left arrow
―
right arrow
Registers the edited sample information. The [Recipe edit] screen
―
will be displayed.
, HOME
[Application] settings screen
Select [Formulation mode]
Go to the recipe list button
Edit button [Sample edit] screen
Description
button displays the previous/next page.
key, LOG-IN key, or MENU
51
6 Sample No.
7 Register button
key displays
/