A&D BA-T Series Instruction Manual page 140

Breeze break auto doors
Display settings: MENU key
[Auto doors] settings screen
1 Auto door opening/closing distance button
2 Back button
Auto door opening/closing distance
1
button
Back button
2
Settings in the red box are default values (factory settings).
BA-T series analytical balances are equipped with auto doors that allow you to open/close the breeze
break without touching the doors.
The positions of the breeze break auto doors are automatically detected by the IR sensors on the
breeze break side surfaces.
At factory settings, the IR sensors on the left and right of the display are assigned to open and close the
breeze break doors.
At factory setting, the position each breeze break door was previously opened to is automatically
detected.
It is also possible to change the function table of the balance for the doors to be fully open or partially
open.
System settings button
Name
Setting value
(setting range)
Full, Half, Set the distance.
-
140
Auto door button
Description
Changes the open position of the
breeze break.
Returns to the previous screen.