A&D BA-T Series Instruction Manual page 185

Weighing data format
Selecting weighing data format
You can select the output format for the RS-232C connection in the [RS-232C interface] screen.
For configuration details, refer to
MENU key
RS-232C interface button
You can select the output format for the USB connection in the [USB interface] screen.
For configuration details, refer to
MENU key
USB interface button
You can select the output format for the LAN connection in the [Wired LAN] screen.
For configuration details, refer to
MENU key
Wired LAN button
You can select the output format for the Bluetooth connection in the [Bluetooth] screen.
For configuration details, refer to
MENU key
Bluetooth button
A&D standard format
This is the standard format for sending data to peripheral devices.
Consists of 16 characters (not including the terminator).
The condition of the data is indicated with a 2-character header.
The data is padded with polarity and zeros (filling the data's higher order's surplus part with zeros).
If the data is zero, the polarity is positive.
The unit consists of three characters.
,
S T +
Header
S T When stable
S When unstable
U
Q T Counting mode when stable
O L When overloaded
In the external key print mode of the AD-8127 multi-functional
compact printer, a received A&D standard format is printed as shown
on the right.
"13.13. RS-232C
System settings button
In the [RS-232C interface] screen, select the output format.
"13.14. USB
System settings button
In the [USB interface] screen, select the output format.
"13.15. Wired
System settings button
In the [Wired LAN] screen, select the output format.
"13.16. Bluetooth".
System settings button
In the [Bluetooth] screen, select the output format.
.
0 1 2 3
Data
interface".
Communication button
interface".
Communication button
LAN".
Communication button
Communication button
4 5 6 7
Unit
C : Carriage return,
R
L : Line feed,
F
: Space,
185
C L
g
R F
Terminator
ASCII 0Dh
ASCII 0Ah
ASCII 20h