Defining Connection Sequence - Agilent Technologies Agilent E5250A User Manual

Example:

Defining Connection Sequence

Following commands are used to specify the Connection Sequence. For details,
refer to "Connection Sequence" on page 5-10.
Command
:ROUT:CONN:SEQ card_no,NSEQ
:ROUT:CONN:SEQ card_no,BBM
:ROUT:CONN:SEQ card_no,MBBR
100 OUTPUT @Hp5250;":ROUT:CONN:SEQ ALL,BBM"
110 ! Sets all cards to Break-before-Make connection
sequence.
Agilent E5250A User's Guide, Edition 11
Programming the E5250A
Creating a Control Program
Description
Connection sequence not specified.
Specifies Break-before-Make
connection sequence.
Specifies Make-before-Break
connection sequence.
6-9