Agilent Technologies Agilent E5250A User Manual page 323

Command
[:ROUT]:CLOS:CARD? card_number
[:ROUT]:CLOS[:LIST] (@channel_list)
[:ROUT]:CLOS[:LIST]? (@channel_list)
[:ROUT]:CONN:RULE card_number,rule
[:ROUT]:CONN:RULE? card_number
[:ROUT]:CONN:SEQ card_number,sequence
Agilent E5250A User's Guide, Edition 11
SCPI Command Summary
Description
Returns channel_list of all closed channels for the
specified card. "Closed channel" means an input
port connected to an output port.
card_number:
For Auto Config mode: 0
For Normal Config mode: 1, 2, 3, or 4
Connects input ports to output ports as specified in
channel_list.
channel_list: Channels to close.
Returns whether specified channels are closed.
0: channel is open (not connected)
1: channel is closed (connected)
channel_list: Channels to check.
Sets the connection rule for the specified card.
card_number:
For Auto Config mode: 0 or ALL
For Normal Config mode: 1, 2, 3, 4, or ALL
rule: FREE: free route, or SROUte: single route
Returns the connection rule of the specified card:
FREE: free route, SROU: single route
card_number:
For Auto Config mode: 0
For Normal Config mode: 1, 2, 3, 4
Specifies the connection sequence mode for the
specified card.
card_number:
For Auto Config mode: 0 or ALL
For Normal Config mode: 1, 2, 3, 4, or ALL
sequence:
NSEQ: No-Sequence mode
BBM: Break-Before-Make mode
MBBR: Make-Before-Break mode
12-5