Example:
Programming the E5250A
Creating a Control Program
Using Bias Mode
If you use the Bias Mode, following commands are available. For details, refer to
"Bias Mode" on page 5-11.
•
Selects input port to be input Bias Port on specified card (for E5252A only).
Command
:ROUT:BIAS:PORT card_no,input_port_no
•
Bias enables the output ports.
Command
:ROUT:BIAS:CHAN:ENAB:CARD card_no
:ROUT:BIAS:CHAN:ENAB:LIST channel_list
•
Bias disables the output ports.
Command
:ROUT:BIAS:CHAN:DISA:CARD card_no
:ROUT:BIAS:CHAN:DISA:LIST channel_list
•
Turns the Bias Mode ON/OFF
Command
:ROUT:BIAS:STAT card_no,ON
:ROUT:BIAS:STAT card_no,OFF
100 OUTPUT @Hp5250;":ROUT:BIAS:PORT ALL,1"
110 ! Selects SMU1 input port to be input Bias Port for all
cards.
120 OUTPUT @Hp5250;":ROUT:BIAS:CHAN:ENAB:CARD ALL"
130 ! Bias enables all output ports on all cards.
140 OUTPUT @Hp5250;":ROUT:BIAS:STAT ALL,ON"
150 ! Turns on the Bias Mode for all cards.
6-10
Description
input_port_no specifies which input port
(on specified card) to be the input Bias
Port.
Bias enables all output ports on
specified card.
Bias enables the specified output
ports.
Description
Bias disables all output ports on
specified card.
Bias disables the specified output ports.
Description
Turns on Bias Mode for card specified by card_no.
Turns off Bias Mode for card specified by
card_no.
Agilent E5250A User's Guide, Edition 11
Description