Defining Labels For The E5250A Input Ports - Agilent Technologies Agilent E5250A User Manual

Defining Labels for the E5250A Input Ports

You can define labels to use for the input ports of each row in the MEMORY
SETUP PANEL.
Select the DEFINE LABEL softkey. The DEFINE LABEL MENU and following
softkeys are displayed:
Softkey
E5250A For displaying softkeys to select the desired input ports. See below.
INPUT
CARDn For selecting the E5255A. You can define a label for the input Bias
INPUT Port of selected E5255A. This softkey is displayed only for card
(n=1 to 4) slots that have the E5255A installed. See next page.
MAIN For returning to VFP main menu.
MENU
To define labels for the E5250A input ports
Select the E5250A INPUT softkey. The following softkeys are displayed.
Softkey
INPUTn For selecting the E5250A input port. You can define a label for the
LABEL selected input port. See below.
(n=1 to 10)
MORE For displaying more softkeys to select the input port. This softkey
toggles between the INPUTn LABEL softkeys n=1 to 5 and n=6 to
10.
RETURN For returning to the DEFINE LABEL MENU.
Select the INPUTn LABEL softkey (n=1 to 10). The following message is
displayed:
Input Label Name. (Max 5 char string)
Type desired label (maximum 5 characters), then press the
If you press the key without typing any characters, the label is cleared.
Enter
Agilent E5250A User's Guide, Edition 11
Controlling the E5250A
Using Virtual Front Panel Utility
Description
Description
key.
Enter
5-31