Driver Functions - Agilent Technologies Agilent E5250A User Manual

Table 8-1
Category
Miscellaneous hpe5250a_init
hpe5250a_close
hpe5250a_reset
hpe5250a_self_test
hpe5250a_error_query
hpe5250a_error_message
hpe5250a_revision_query
hpe5250a_timeOut
hpe5250a_timeOut_Q
hpe5250a_errorQueryDetect
hpe5250a_errorQueryDetect_Q Queries for the automatic error checking setting.
hpe5250a_dcl
hpe5250a_esr_Q
hpe5250a_readStatusByte_Q
hpe5250a_opc_Q
Mode Control hpe5250a_func
hpe5250a_connRuleSeq
Bias Mode hpe5250a_biasPort
hpe5250_biasChanCard
hpe5250_biasChanList
hpe5250a_biasState
hpe5250a_biasChanList_Q
Couple Port hpe5250a_couplePort
hpe5250a_coupleState

Driver Functions

Table 8-1 lists all the functions for the E5250A. You will see a brief description of
the functions in the table.
For the description, syntax and parameters of the function, refer to the reference
section following this table. The driver functions in the reference section will appear
in the alphabetical order.
E5250A Driver Function Lists
Function
Agilent E5250A User's Guide, Edition 11
Description
Initializes the E5250A.
Closes the connection with the E5250A.
Executes the E5250A reset.
Executes the E5250A self-test.
Queries for the E5250A error code/message.
Queries for the driver error.
Queries for the E5250A firmware/driver revisions.
Sets the timeout.
Queries for the timeout setting.
Sets the automatic error checking.
Sends the Device Clear.
Queries for the ESR status.
Reads the E5250A status byte.
Checks the E5250A operation completion status.
Sets the configuration mode.
Sets the connection rule/sequence.
Selects the input bias port.
Selects the card for bias mode.
Selects the channel list for bias mode.
Sets the bias port state.
Queries for the bias channel list.
Selects the couple port.
Sets the couple port state.
VXIplug&play Driver
Driver Functions
8-5