Agilent Technologies Agilent E5250A User Manual page 325

Command
[:ROUT]:COUP[:STAT]? card_number
[:ROUT]:FUNC channel_config
[:ROUT]:FUNC?
[:ROUT]:OPEN:CARD card_number
[:ROUT]:OPEN[:LIST] (@channel_list)
[:ROUT]:OPEN[:LIST]? (@channel_list)
:SYST:CCON? card_number
Agilent E5250A User's Guide, Edition 11
SCPI Command Summary
Description
Returns Couple Mode of specified card.
0: Couple Mode is OFF
1: Couple Mode is ON.
card_number:
For Auto Config mode: 0
For Normal Config mode: 1, 2, 3, 4
Sets the channel configuration mode.
channel_config:
ACON: Auto Config Mode
NCON: Normal Config Mode
Returns present channel configuration:
ACON: Auto Config Mode
NCON: Normal Config Mode
Disconnects all input ports from all output ports for
specified card.
card_number:
For Auto Config mode: 0 or ALL
For Normal Config mode: 1, 2, 3, 4, or ALL
Disconnects the input ports from output ports as
specified in channel_list.
channel_list: Channels to open.
Returns whether specified channels are opened.
0: channel is closed (connected)
1: channel is opened (disconnected)
channel_list: Channels to check.
Returns the card configuration information:
E5252A: no info returned.
E5255A: input port and resistance info for each
block.
card_number: 1, 2, 3, or 4
12-7