Saving/Loading The Setup Data - Agilent Technologies Agilent E5250A User Manual

Controlling the E5250A
Using Virtual Front Panel Utility

Saving/Loading the Setup Data

Select the SAVE/LOAD softkey. The following softkeys are displayed:
Softkey
CATALOG Lists the files of diskette that is in the 4155/4156 internal disk
drive.
SAVE FILE For saving setup data to the diskette that is in the 4155/4156
internal disk drive. See below.
LOAD FILE For loading setup data from the diskette that is in the
4155/4156 internal disk drive. See below.
RETURN Returns to the VFP main menu.
To save setup data to diskette
Select the SAVE FILE softkey. The following message is displayed:
Input Save file name
Type the name (maximum 8 characters) of file to which you want to save the setup
data, then press the
Enter
To cancel this operation, press the
To load setup data from diskette
Select the LOAD FILE softkey. The following message is displayed:
Input Load file name
Type the file name of setup data you want to load, then press the
setup data is loaded into the VFP.
To cancel this operation, press the
After loading the file, the E5250A changes to the setting of setup memory 1.
5-42
Description
key.
key without typing the file name.
Enter
key without typing the file name.
Enter
Agilent E5250A User's Guide, Edition 11
key. The VFP
Enter