Route Subsystem - Agilent Technologies Agilent E5250A User Manual

Command Reference
:ROUTe Command Tree

:ROUTe Subsystem

The :ROUTe subsystem has commands for controlling the signal routing.
"Open a channel": opens relays to disconnect the channel (that is, disconnects input
port from output port).
"Close a channel": closes relays to connect the channel (that is, connects input port
to output port).
:ROUTe Command Tree
Command
[:ROUTe]
:BIAS
:CHANnel
:PORT
:PORT?
[:STATe]
[:STATe]?
:CLOSe
:CARD?
[:LIST]
[:LIST]?
7-20
:DISAble
card_number | ALL
:CARD
(@channel_list)
[:LIST]
[:LIST]? (@channel_list)
:ENABle
card_number | ALL
:CARD
[:LIST] (@channel_list)
(@channel_list)
[:LIST]?
card_number | ALL,bias_port
card_number
card_number | ALL,state
card_number
card_number
(@channel_list)
(@channel_list)
Agilent E5250A User's Guide, Edition 11
Parameter