E5255A Configuration Examples - Agilent Technologies Agilent E5250A User Manual

Figure 2-3

E5255A Configuration Examples

The following example configurations are described:
• "24-output multiplexer (3-BIAS inputs, 1-IV input, 1 module)"
• "24-output multiplexer (1-BIAS input, 1-IV input, 1 module)"
• "96-output multiplexer (1-BIAS input, 1-IV input, 4 modules)"
24-output multiplexer (3-BIAS inputs, 1-IV input, 1 module)
To make this multiplexer, you need a E5255A. See Figure 2-3 for example setup.
The example uses the SMU INPUT 1 connector as the IV input, and uses 0 Ω
resistors.
24-output multiplexer (3-BIAS inputs, 1-IV input, 1 module)
1. Connect the IVin1 cable to the SMU1 input connector on the E5255A.
2. Connect the IVin2 cable to the IVout1 connector.
3. Connect the IVin3 cable to the IVout2 connector.
Agilent E5250A User's Guide, Edition 11
Installation
Installing the E5250A
2-13