Example:
Example:
Programming the E5250A
Creating a Control Program
Defining Channel Configuration Mode
Following commands are used to set the Channel Configuration mode. For details,
refer to "Channel List and Channel Configuration" on page 5-6.
Command
:ROUT:FUNC NCON
:ROUT:FUNC ACON
100 OUTPUT @Hp5250;":ROUT:FUNC NCON"
110 ! Sets E5250A to Normal channel configuration mode.
Defining Connection Rule
Following commands are used to set the Connection Rule. For details, refer to
"Connection Rule" on page 5-9.
Command
:ROUT:CONN:RULE card_no,FREE
:ROUT:CONN:RULE card_no,SROU
100 OUTPUT @Hp5250;":ROUT:CONN:RULE ALL,FREE"
110 ! Sets all cards to Free Connection rule.
6-8
Description
Sets Normal Channel Configuration mode.
Sets Auto Channel Configuration mode.
Sets Free Connection rule.
Sets Single Connection rule.
Agilent E5250A User's Guide, Edition 11
Description