Agilent Technologies Agilent E5250A User Manual page 129

To delete a setup memory
Select the DELETE SETUP softkey. The following message is displayed.
Input setup memory number to be deleted? ENTER to cancel.
Type the setup memory number to delete, then press the
For example, if you type 12, setup memory 12 is deleted, setup memories 13 to 24
are shifted down by one, and setup memory 24 is set to "Open All".
If you press key without typing a number, operation is canceled.
Enter
To insert a setup memory
Select the INSERT SETUP softkey. The following message is displayed.
Input setup memory number to be inserted? ENTER to cancel.
Type the setup memory number where you want to insert a new setup memory, then
press the key.
Enter
For example, if you specify 12, setup memory 24 is deleted, setup memories 12 to
23 are shifted up by one, and new setup memory 12 is set to "Open All".
If you press key without typing a number, operation is canceled.
Enter
To clear setup memory
To clear a setup memory, select the CLEAR SETUP softkey. The following message
is displayed:
Input setup memory number to be cleared? ENTER to cancel.
Type the setup memory number to clear, then press the
is set to "Open All".
To clear all setup memories, select the CLEAR ALL softkey. The following
message and softkeys are displayed:
Clear all setup memory. OK?
Softkey
CLEAR ALL Clears all setup memories.
CANCEL Cancels the clear operation.
Select the CLEAR ALL softkey to clear all setup memories.
Agilent E5250A User's Guide, Edition 11
Controlling the E5250A
Using Virtual Front Panel Utility
key.
Enter
key. The setup memory
Enter
Description
5-35