A Array Controller Specifications; Physical And Electrical Specifications For The Hsg80 Array Controller And Cache Modules; Environmental Specifications - HP StorageWorks HSG80 Array Controller V8.7 Maintenance And Service Manual

This appendix contains physical, electrical, and environmental specifications for
enclosures that use the HSG80 array controller.
Physical and Electrical Specifications for the HSG80
Array Controller and Cache Modules
Table A–1 lists the physical and electrical specifications for the controller and cache
modules. Voltage measurements in Table A–1 are nominal measurements without
tolerances.
Table A–1: Controller and Cache Module Specifications
Hardware
HSG80 array 305 mm
controller
Cache module, 138 mm
512 MB

Environmental Specifications

The HSG80 array controller is intended for installation in a Class A environment. The
operating environmental specifications are listed in Table A–2 and the non operating
environmental specifications are listed in Table A–3. These specifications are the
same for all StorageWorks storage devices.
HSG80 Array Controller V8.7 Maintenance and Service Guide
Array Controller Specifications
Width Depth
241 mm
(12 in) (9.5 in)
241 mm
(5.5 in) (9.5 in)
Current at
Power +5 VDC
29.0 W 5.8 A
8.52 W
10.5 W
Current at +12 VDC
Cache running
diagnostics and fully
charged battery
(400 mA)
Cache running and
battery charging
(880 mA)
A
A–1