Replacing Dimms; Cache Module Dimm Locations - HP StorageWorks HSG80 Array Controller V8.7 Maintenance And Service Manual

Common Replacement Information and Procedures

Replacing DIMMs

This section shows how to replace DIMMs in a cache module. DIMM locations are
shown in Figure 2–7 and supported configurations are shown in Table 2–1.
1
2
Figure 2–7: Cache module DIMM locations
Table 2–1: Cache Module Memory Configurations
Memory
128 MB
256 MB
512 MB
CAUTION: ESD can easily damage a cache module or a DIMM. Wear a snug-fitting,
grounded ESD wrist strap.
NOTE: If a DIMM fails, note which DIMM needs replacement based on the diagram displayed
on the console.
Use Figure 2–8 during the removal and installation procedures for component
clarification.
2–12
3
4
CXO6576B
DIMMs Quantity
32 MB
128 MB
128 MB
HSG80 Array Controller V8.7 Maintenance and Service Guide
Location
1 2 3 4
4
1 3
2
1 2 3 4
4