HP StorageWorks HSG80 Array Controller V8.7 Maintenance And Service Manual page 151

3. Start CLCP with the following command:
RUN CLCP
The following menu appears:
Select an option from the following list:
Code Load & Patch local program Main Menu
0: Exit
1: Enter Code LOAD local program
2: Enter Code PATCH local program
3: Enter EMU Code LOAD utility
Enter option number (0..3) [0] ?
4. Enter option 2. The following menu appears:
You have selected the Code Patch local program. This program is used to manage
software code patches. Select an option from the following list:
Type ^Y or ^C (then RETURN) at any time to abort Code Patch.
Code Patch Main Menu
0: Exit
1: Enter a Patch
2: Delete Patches
3: List Patches
Enter option number (0..3) [0] ?
5. Enter option 2. The following display appears:
This is the Delete Patches option. The program prompts you for the software
version and patch number you wish to delete. If you select a patch for
deletion that is required for another patch, all dependent patches are also
selected for deletion. The program lists your deletion selections and asks
if you wish to continue.
Type ^Y or ^C (then RETURN) at any time to abort Code Patch.
The following patches are currently stored in the patch area:
Software Version - Patch number(s)
xxxx
Currently, xx% of the patch area is free.
Software Version of patch to delete?
HSG80 Array Controller V8.7 Maintenance and Service Guide
xxxx
Upgrading the Subsystem
5–31