Replacing A Glm; Cleaning Procedure For Glm - HP StorageWorks HSG80 Array Controller V8.7 Maintenance And Service Manual

Figure 2–3: Cleaning procedure for GLM
3. Carefully remove dust from the cavity by rotating the swab tip back and forth one
or two times.
4. Repeat step 1 through step 3 for the receiving side of the optical GLM cavity.

Replacing a GLM

This section shows how to replace a GLM in a controller. Figure 2–4 shows the
location and orientation of the GLMs.
HSG80 Array Controller V8.7 Maintenance and Service Guide
Common Replacement Information and Procedures
1
6
5
4
3
2
1
2
3
1 GLM
2 Receptacle
3 Swab
CXO6531B
2–7