Master/Slave Board - HBM GEN Series User Manual

2.2

Master/Slave board

The Master/Slave board is easily inserted into the GEN series mainframe and is automatically
recognized by the Perception software. A Master/Slave board can be used as a master or slave.
One board is required in the master mainframe and one board is required per slave mainframe.
®
Each board has eight LC connectors for the fiber-optic cable.
Figure 2-1: Master/Slave board
In Master mode, all connectors M function as master output (OUT 1 to OUT 8).
In Slave mode, the top connector S functions as a slave input (IN), all other connectors are
unused.
14 I2710-1.0 en