Software Configuration; Summary Of Setup Variables - Teledyne 401 Instruction Manual

Teledyne API Model 401 O

4.15 Software Configuration

The software configuration can be displayed by entering the button sequence SETUP-CFG-
LIST. For example the M401 could display:
"O3 CALIBRATOR"
"SBC40 CPU"
Stating that the instrument was an Ozone Calibrator using the SBC40 computer. This feature is
useful for showing any special features that are present in the currently installed PROM.

4.16 Summary Of Setup Variables

The setup variables are summarized in Table 4-1 in terms of the button sequences used to access
them.
Photometric Calibrator Instruction Manual, 01124, Rev. J1
3
4-6