Teledyne API Model 401 O
SAFETY MESSAGES
Your safety and the safety of others is very important. We have provided many important safety
messages in this manual. Please read these messages carefully.
A safety message alerts you to potential hazards that could hurt you or others. Each safety
message is associated with a safety alert symbol. These symbols are found in the manual and
inside the instrument. The definition of these symbols is described below:
The analyzer should only be used for the purpose
If you use the analyzer in a manner other than that for which
it was intended, unpredictable behavior could ensue with
Photometric Calibrator Instruction Manual, 01124, Rev. J1
3
GENERAL WARNING/CAUTION: Refer to the instructions for details on the
specific danger.
CAUTION: Hot Surface Warning
CAUTION: Electrical Shock Hazard
Technician Symbol: All operations marked with this symbol are to be performed
by qualified maintenance personnel only.
CAUTION
and in the manner described in this manual.
possible hazardous consequences.
ii