VETRON 5000 Service Manual page 74

03. ADJUSTMENT
32. THREAD TENSION SERVICE / 1-NEEDLE
-4-4
9
DISPLAY
» ASSEMBLY AND ADJUSTMENT OF THE THREAD TENSION
NOTICE:
The thread tension is set at 50% to have su cient adjustment range up and down.
S e t t ns e i o n A
14C
f o r 5 0 % 157
15C
16C
S e t t ns e i o n A
17C
f o r 0 % 157
18C
Y S N E / O
19C
S V A E
05/2019
72
VETRON 5000 - FLAT BED MACHINE - SERVICE MANUAL
STEP
Turn the machine with the mechanical handwheel, the thread take-up lever
ton top dead center.
Thread the thread tension and mesuring device
sion. Turn JOG KEY until the thread tension device shows 450 -500g .
» Confirm.
» Turn until the thread tension plates are touching each other slightly without force.
» Confirm.
Save (see 02.03. / Page 21).
10
DESCRIPTION
10
as shown in image 2 and measure ten-
2
in the posi-
9