VETRON 5000 Service Manual page 16

01. OPERATING ELEMENTS
04. ELECTRONIC HANDWHEEL & REVERSE SEWING
NOTICE
The electronic handwheel is not active unless the machine has performed at least one
stitch.
For safety reasons it is necessary during "BLOCKED MODE" to push and hold
the programmable button (the lowest button)
1
ELECTRONIC HANDWHEEL – FUNCTION
By turning the handwheel, you can move the needle bar up or down.
From here on, the operating type is indicated by the following icons:
Pressing the handwheel:
Turning the handwheel:
2
REVERSE SEWING
Pulling the button changes the sewing direction.
05/2019
14
VETRON 5000 - FLAT BED MACHINE - SERVICE MANUAL
to activate the electronic handwheel.
3
stitch-for-stitch function / needle positioning
1
2
3