VETRON 5000 Service Manual page 24

02. MANAGEMENT AND UPDATE
04. BASIC PARAMETER RESET
DISPLAY
» BASIC PARAMETER RESET
01
P D L E A
02
R M E O V E M A T E R I A L
0 1 0 T ST E
03
P O R GN A M E
04
S e v c r i e
05
06
07
5 0 00 - 0-0 1 2
08
E n t e r m class -
09
5 0 0- 0 52 2
10
E n t e r s rialnr e
11
Y S N E / O
12
S V A E
0 1 R e po f s d r ve i
13
s e t u p
INFO:
14 Adjustment steps 03.12., 03.32. C, 03.33. (optional) and 03.34. (optional)
must be performed again.
05/2019
22
VETRON 5000 - FLAT BED MACHINE - SERVICE MANUAL
STEP
Turn on the machine. Wait until the message PRESS PEDAL
is appearing in the display.
Press the pedal.
Press the PARAMETER KEY.
»
Via JOG KEY the following functions are available.
S e v c r i e
» Turn the JOG KEY if necessary
until SERVICE is appearing in the Display.
» Confirm.
» Turn the JOG KEY if necessary until BASIC PARAMETER RESET
is appearing in the Display.
» Confirm.
» To change the machine class
» Confirm.
» To change the serial number
>
» Confirm.
Choose YES to reset all basic parameters to the default values.
The software automatically switches to SYNCHRONISATION OF THE MAIN DRIVE WITH THE
MACHINE (03.01. / Page 35). You have to repeat this point in order to proceed.
D a ta m an a g e r Basic
DESCRIPTION
INFO: After pressing the pedal the
machine is initializing itself.
p a r ameter
INFO: The sofware will ask you to
confirm that you wish to proceed.
INFO: The sofware will ask you to
confirm that you wish to proceed.