VETRON 5000 Service Manual page 59

DISPLAY
» ADJUSTMENT OF THE STITCH LENGTH CORRECTION
01
02
2 1 S t tc i h i n
03
s t i t c h s etup
P D L E A
04
R M E O V E M A T E R I A L
A D JU S T s t l e n ht g
05
o f f s e t : 0
06
07
Y S N E / O
08
S V A E
STEP
Activate the ADJUSTMENT WIZARD
(see 02.01. / Page 19).
» Until chapter 21 appears on the display.
» Confirm.
Press the pedal.
Run the machine without thread on a sheet of paper approximately 15 stitches forward and
then 15 reverse. Measure the distance of the same number of stitches forward and reverse
and compare the results.
» If you want to make changes.
» Confirm.
SAVE (see 02.03. / Page 21).
03. ADJUSTMENT
21. ADJUSTMENT OF THE STITCH LENGTH CORRECTION
DESCRIPTION
INFO: Machine is set to 5mm stitch
length and maximum speed 500
rpm. Forward and reverse sewing is
possible. Backtack can be executed via
switch or slider.
If the forward and reverse stitch length
is not equal, adjust the value in the display
by turning the jog key and repeat the
measurement procedure.
VETRON 5000 - FLAT BED MACHINE - SERVICE MANUAL
05/2019
57