Capitalizing Characters; Using The Power Button; Configuring The Backlight Settings - Intermec CK3a1 User Manual

Capitalizing Characters

You can capitalize characters individually, or you can type all capital
letters by enabling Caps Lock.
To capitalize a single character
•
•
To enable Caps Lock
•
•
The Caps Lock LED lights up green to show that the CK3 is in the
Caps Lock mode.
To disable Caps Lock
•
For information on how to enter specific characters with keystrokes,
see Appendix C,

Using the Power Button

When you press the Power button (
mode. In this lower power mode, the CK3 continues to supply power
to all memory, but turns off power to most hardware such as the
display. This power-saving feature is designed to prolong battery life.

Configuring the Backlight Settings

By default, the CK3 goes into Screen Off mode when there is no
activity on the computer. Screen Off mode turns off the backlight and
display. Press a key or tap the screen to resume activity.
CK3 Mobile Computer User's Manual
On the alphanumeric keypad, press the
key to select the Shift function. Press the
character.
On the numeric keypad, press the
select the Shift function.
On the alphanumeric keypad, press
again to disable the Caps Lock.
On the numeric keypad, press
Press the color modifier key again.
"Keypads and Keystrokes" on page
Chapter 1 — Using the Computer
key, and then the
key, and the
key, and then the key to
, then the key. Press
.
105.
), you put the CK3 into suspend
9