Optimising During Dynamic Fitting; Notices Regarding Dynamic Fitting - Otto Bock Dynion 3R85 Instructions For Use Manual

12
: : Optimisation with 3D mode deactivated
► Optimise the static alignment so the values for the reference points shown in the illustration
are met and the following points are observed:
• : 3D mode is deactivated (3D symbol – colour: dark grey).
- Sequence for optimisation in reference to the planes:
: Sagittal plane –
2.1
• : The prosthetic knee joint is in extension. The lock is activated.
• : The reference line lies on the sagittal reference point of the prosthetic knee joint (pivot
point).
• : The reference points are in the centre (50 : 50: pyramids of the prosthetic knee joint and
the prosthetic foot, shoes).
• : The extension of the reference line points to the reference point (anterior superior iliac
spine).
• : The reference line lies on the frontal reference point of the prosthetic knee joint (pyramid).
• : The extension of the reference line points to the reference point (pyramid).
12
2.1
Live view
1.0 Nm 1.0 Nm
40.5 kg 40.5 kg
1
2

7.4 Optimising during dynamic fitting

7.4.1 Notices regarding dynamic fitting

CAUTION
Adjusting the Settings
Fall due to incorrect or unfamiliar settings
Only adapt the settings to the patient gradually.
►
Explain the effects of the adjustments on the use of the prosthesis to the patient.
►
: Frontal plane
2.2
30 mm 30 mm
743L500 3D L.A.S.A.R. Posture/743L100 L.A.S.A.R. Posture
Spina iliaca anterior
superior
50 % : 50 %
2.2
0 – 20 mm 0 – 20 mm
0 – 20 mm 0 – 20 mm
0 – 20 mm 0 – 20 mm
21