Reuse And Lifetime; General Safety Instructions - Otto Bock Dynion 3R85 Instructions For Use Manual

3.5 Reuse and lifetime

CAUTION
Reuse on another patient
Fall due to loss of functionality as well as damage to the product
Only use the product for a single patient.
►
CAUTION
Exceeding the lifetime
Fall due to change in or loss of functionality and damage to the product
Ensure that the maximum lifetime defined in this section is not exceeded.
►
This prosthetic component has been load tested by the manufacturer according to ISO 10328.
The maximum lifetime is 5 years.

4 General safety instructions

CAUTION
Reaching into the area of the joint mechanism
Pinching of limbs (e.g. fingers) and the skin due to uncontrolled joint movement
Do not reach into the joint mechanism during use.
►
Close attention is required during assembly and adjustment tasks.
►
CAUTION
Mechanical damage to the product
Risk of injury due to change in or loss of functionality
Use caution when working with the product.
►
If the product is damaged, check it for proper function and readiness for use.
►
In case of changes in or loss of functionality, do not continue using the product (see "Signs
►
of changes in or loss of functionality during use" in this section).
Take any necessary measures (e.g. repair, replacement, inspection by the manufacturer's
►
customer service, etc.).
Signs of changes in or loss of functionality during use
Changes in functionality can manifest themselves, for example, through a changed gait (swing
phase, stance phase), incomplete extension, stiffness and the development of noise.
10