Environmental Conditions - Otto Bock Dynion 3R85 Instructions For Use Manual

3.4 Environmental conditions

CAUTION
Use under unallowable environmental conditions
Fall due to damaged product
Do not expose the product to unallowable environmental conditions (see the table "Unallow­
►
able environmental conditions" in this section).
If the product was exposed to unallowable environmental conditions, take suitable steps
►
(e.g. cleaning, repair, replacement, inspection by the manufacturer or a specialist workshop
etc.).
Allowable environmental conditions
Temperature range:
Storage + Transportation (in original packaging): -20 °C – +60 °C
Always store in a dry place.
Use: -10 °C – +45 °C
Relative humidity: 20 % – 90 %
Contact with drops of water (fresh water, light rain)
Drying is required after contact.
Contact with soapy water in the form of splashed water (showering); contact with perspiration
Submersion in chlorinated water (e.g. pool) – maximum depth: 2 m
Rinsing with clean fresh water and drying is required after contact.
Submersion in salt water with permissible salt content
• Salt content: max. 3.5 %
• Maximum depth: pool: 1 m, ocean: 0.5 m
Thorough rinsing with or immersing in clean fresh water and drying is required after contact
(section "Cleaning" – see page 48).
An inspection by qualified personnel (prosthesis manufacturer) is required after use (days per
year: 14).
An inspection by service (prosthetic knee joint manufacturer) is required in case of damage and
functional limitations.
Contact with dust, foam cover particles, drifting sand (e.g. walking on the beach)
Regular cleaning is required.
Contact with salty air – condensing
Rinsing with clean fresh water and drying is required after contact.
UV resistant
Cleaning with damp cloth (fresh water + commercially available, solvent-free cleaning agent)
Unallowable environmental conditions
Contact with hygroscopic particles (example: talcum); contact with large amounts of sand and
dust (e.g. burying, kneeling in sand, construction site); contact with acids; contact with urine;
submersion in salt water with excessive salt content
• Salt content: > 3.5 % – e.g. brine bath
Cleaning agents and disinfectants with solvents, chlorine and phosphate
High water pressure (e.g. diving, jumping into water)
9