Otto Bock Dynion 3R85 Instructions For Use Manual page 47

Hide thumbs Also See for Dynion 3R85:
Table of Contents

Advertisement

Lock the prosthetic knee joint before using the prosthesis in wet areas.
Adjust the walking speed to the ambient conditions.
Make sure the lock is not deactivated or activated through unintentional operation.
On wet surfaces, only use a prosthetic foot with a slip-resistant sole.
INFORMATION
Noises may occur due to the play between the extension stop and lock pin when walking with
the lock activated. The lock can only be released by actively pressing the deactivation button.
Cycling mode
CAUTION
Switching between the modes (standard mode <–> cycling mode)
Risk of falling due to changed function (deactivated stance phase flexion resistance in cycling
mode)
Familiarise yourself with the functionality of the modes by practising extensively.
For safe walking, switch back to standard mode each time after using cycling mode (stance
phase flexion resistance activated).
Carefully verify that the desired mode has actually been activated each time after switching.
Use in water
 +  : CAUTION! Activate the lock prior
to use in water.
: NOTICE! Then activate cycling mode to
avoid product damage.
: CAUTION! After use in water, deacti­
vate cycling mode to avoid the risk of fall­
ing.
 +  : Then deactivate the lock.
47

Advertisement

Table of Contents
loading

Table of Contents