Otto Bock Dynion 3R85 Quick Reference Manual
Hide thumbs
Also See for Dynion 3R85:
- Instructions for use manual (400 pages) ,
- Instructions for use manual (52 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Otto Bock Dynion 3R85
Summary of Contents for Otto Bock Dynion 3R85
- Page 1 Dynion 3R85 Quick reference guide...
- Page 3 Optimising the static alignment 743L500 3D L.A.S.A.R. Posture 743L100 L.A.S.A.R. Posture Spina iliaca anterior 40 – 60 mm 40 – 60 mm superior Live view 10 mm 10 mm 50 % : 50 % 20 mm 20 mm 1.0 Nm 1.0 Nm 50.0 % 50.0 %...
- Page 4 Optimisation during the dynamic fitting – exercises and adjustments Sitting down Adjust the stance phase flexion resistance so it provides the patient with adequate safety yet does not generate excessive resistance. Walking Allow the patient to walk only with safeguards in place. At the start of the walking exercise, increase the switching threshold so the swing phase cannot be enabled.
- Page 5 Sitting down (Repeat for readjustment) Check the stance phase flexion resistance for sitting down again and match it with the setting for walking down ramps and stairs. Walking (Repeat readjustment) Since the switching threshold buffer exhibits settling (especially during the first 10 minutes), it is essential to check again while walking on a level surface whether short, quick steps are still possible or whether the settings have to be readjusted.
- Page 6 Using the lock Put weight on the prosthetic knee joint and push against the extension stop during activation and deactivation. Then, carefully check for proper function. Cycling Activate cycling mode as illustrated to deactivate stance phase flexion damping. Switch back to standard mode for normal walking. At the end of the exercises and adjustments, check again whether the switching threshold is correctly adjusted...
- Page 8 Ottobock SE & Co. KGaA Max-Näder-Straße 15 · 37115 Duderstadt · Germany T +49 5527 848-0 · F +49 5527 848-3360 healthcare@ottobock.de · www.ottobock.com...