Optimising The Static Alignment - Otto Bock Dynion 3R85 Instructions For Use Manual

7.3 Optimising the static alignment

INFORMATION: Additional technical knowledge is provided by the instructions for use of the
measuring apparatus being used, the TF alignment poster and the Ottobock seminars.
The 743L500 3D L.A.S.A.R. Posture measuring apparatus is needed to optimise the static align­
ment.
The following optimisation methods are available:
• : Optimisation with 3D mode activated
• : Optimisation with 3D mode deactivated
The optimisation method
With the 743L100 L.A.S.A.R. Posture, optimisation is possible only based on the values of the
optimisation method .
can be used as an optional second step.
19