Combination Possibilities; Combination With An Osseointegrated Implant System - Otto Bock Genium 3B1-3 Instructions For Use Manual

The microprocessor-controlled hydraulic unit offers the following advantages
• Approximation of the physiological gait pattern
• Stability while standing and walking
• Adaptation of product characteristics to various surfaces, inclines, gait situations and walking speeds
Essential performance of the product
• Stability in the stance phase
• Adjustable swing phase extension resistance

2.3 Combination possibilities

This product can be combined with the following Ottobock components:
Prosthetic hip joints
• Modular prosthetic hip joint: 7E7
• Monocentric prosthetic hip joint: 7E9
Adapters
• 4R104=60 double adapter, sliding
• 4R104=75 double adapter, sliding
• Rotation adapter: 4R57, 4R57=*
• 4R41 lamination anchor with pyramid receiver
• 4R43 lamination anchor with threaded connector
• 4R89 lamination anchor with pyramid adapter
• 4R111=N lamination anchor with threaded connect­
or
Tube adapter
• AXON tube adapter: 2R20
• AXON tube adapter with torsion unit: 2R21
Cosmetic cover/protector
• Foam cover: 3S26
• 4X880=* Genium Protective Cover
Prosthetic feet
The maximum allowable patient weight depends on the foot size.
• 1M10 Adjust
• 1A30 Greissinger plus
• 1C30 Trias
• 1D35 Dynamic Motion
• 1C40 C-Walk
• Taleo: 1C50
• 1C60 Triton
• 1C61 Triton Vertical Shock
• 1C62 Triton Harmony
• 1C63 Triton Low Profile
The 1C63 Triton Low Profile prosthetic foot may only be combined with this knee joint in the ranges listed below
(see table).
Please contact Ottobock customer service if you would like a combination outside the approved ranges.
Body weight
Up to 125 kg (up to 275 lbs)
126 kg to 150 kg (276 lbs to 330 lbs)

2.3.1 Combination with an osseointegrated implant system

This product can be connected to a socket or to an osseointegrated, percutaneous implant system.
In case of connection to an implant system, verify that the manufacturer of the implant system and the manufactur­
ers of the corresponding exoprosthetic components/adapters also permit this combination. It must be ensured that
all indications/contraindications, the field of application, the conditions of use and all safety instructions are com­
Genium 3B1-3/3B1-3=ST
3D
• Helix prosthetic hip joint: 7E10
• 4R111 lamination anchor with pyramid receiver
• 4R116 lamination anchor with pyramid adapter
• Lamination anchor with pyramid receiver and
angled arm: 4R119
• 4R40 torsion adapter
• 4R118 adapter plate
• Quickchange: 4R10
• 1C64 Triton Heavy Duty
• Triton side flex: 1C68
• 1E56 Axtion
• 1E57 Lo Rider
• Challenger: 1E95
• 1B1 Meridium
• Meridium: 1B1-2
• 1C10 Terion
• Empower: 1A1-1
Approved foot size [cm]
21 to 30
21 to 28
Product description
13