I Skip Channel Setting - Icom ID-1 Instruction Manual

I Skip channel setting

The memory skip function speeds up scanning by checking
only those memory channels not set as skip channels. Set
skip channels as follows.
D D Setting from the application
q Display the Memory channel screen.
- Select "Edit Memory Channel(M)..." in View menu.
- Click " " in tool bar.
- Press [F6] key on the PC keyboard.
wDouble click the "SKIP" cell of the desired memory chan-
nel, then select the skip condition from "OFF" and "SKIP."
• "SKIP" indicator appears on the main screen when "SKIP" is se-
lected.
• Scan edge and call channels cannot be selected as the skip
channel.
eRepeat the step w to set the skip condition for another
memory channels, if desired.
Double click then select the
desired skip condition.
D D Setting from the RC-24
q Select the desired memory channel.
➥ Push [V/M] to select memory mode.
➥ Select the desired memory channel number with [DIAL]
or keypad.
wPush [PRIO•
•7] for 0.5 sec. to turn the skip setting ON
and OFF.
• " " appears when the skip setting ON.
[PRIO• •7]
11
SCAN OPERATION
LOW
Appears
11
88