I Microsoft Windows 98/Me - Icom ID-1 Instruction Manual

I Microsoft
®
Windows
q Connect the ID-1 to the desired USB port.
• Push [POWER] to turn the power ON.
• "New Hardware is found" dialog box appears.
wThe "New Hardware Found" will come up as below. Click
[Browse...].
eInsert the supplied CD into the drive.
rClick [Z] to select the appropriate CD-ROM drive then click
"Driver" folder. After the driver is found, click [OK].
w Select
q Click to select
®
98/Me
Click
e Click
DRIVER INSTALLATION
t Click [OK].
• The driver installation starts.
y After the installation, eject the CD.
• Rebooting the PC is recommended.
3
Click
3
22