Icom ID-1 Instruction Manual page 70

8
REPEATER OPERATION— VOICE
D D Setting from the RC-24
q Push [MODE] to select DV (Digital voice) mode.
• " " appears.
w Set the desired receive frequency
e Push [RP•4] several times to select the repeater mode.
• Select " " or "
[RP•4]
[MODE]
rPush [CS•
•1] to enter call sign select mode, then rotate
[DIAL] to select the desired station call sign.
• When sending a CQ, push [BK•
• Refer to the pages 42 to 44 for call sign setting when the desired
call sign is not programmed.
63
(repeater output frequency)
."
LOW
•.] for 0.5 sec. to displays "
tPush [CS•
•1] one more time to select "
tate [DIAL] to select the desired repeater call sign.
. • Refer to the pages 42 to 44 for call sign setting when the desired
call sign is not programmed.
• Push [CS• •1] one more times again to select "
set the desired repeater call sign when using the repeater link-
ing capability.
• When linking repeaters via internet network (gateway connec-
tion), pushing [ ] for 0.5 sec. may be necessary depending on
the repeater system.
[DIAL]
[CS• •1]
."
yPush [CS•
•1] once or twice to exit call sign select
mode.
u Push [PTT] to transmit, release [PTT] to receive.
i To clear "
" or "
," then ro-
LOW
" push [RP•4] once or twice.
" then