I Microphone And Speaker Connections - Icom ID-1 Instruction Manual

I Microphone and speaker connections

Connect the supplied microphone to the [MIC] connector on
the remote controller (RC-24) or front panel and the speaker
to the [SP] connector on the rear panel as follows.
• Microphone connection through RC-24
to [MIC]
to [MIC]
ID-1
Mic extension
cable, OPC-647
(2.5 m; 8.2 ft)
RC-24
INSTALLATION AND CONNECTIONS
• Microphone connection without RC-24
to [MIC]
• Speaker connection
SP-22
ID-1
ID-1
to [SP]
2
2
16