Icom ID-1 Instruction Manual page 19

D D Function display
q w e r t
i
q S/RF INDICATORS
➥ Shows the relative signal strength while receiving sig-
nals in 3 steps.
➥ Shows the output power level while transmitting.
w TRANSMIT INDICATOR
Appears while transmitting.
y u
e BUSY INDICATOR
Appears when a signal is being received, the squelch is
open, or the monitor function is activated.
NOTE: If this indicator appears and no audio is heard it
is one of several conditions.
1. Verify audio level setting.
2. Verify connection of external speaker.
3. FM: Signal coming in, but does not match TSQL.
r POCKET BEEP INDICATORS (p. 94)
Appears when the pocket beep function is activated.
t LOCK INDICATOR (p. 38)
Appears when the lock function is in use.
y LOW POWER INDICATOR
Appears when low output power is selected.
u MESSAGE INDICATOR
Blinks when a message is received. (p. 51)
i MULTI-FUNCTION INDICATOR
Shows variety of information, such as the operating fre-
quency, operating mode, memory names, set mode item
and conditions.
PANEL DESCRIPTION
Digital Voice: Incoming signal does not match call
signs in the call sign squelch list.
1
1
12