Icom ID-1 Instruction Manual page 80

10
MEMORY/CALL OPERATION
• Selecting from Memory Channel screen
w Display the Memory channel screen.
- Select "Edit Memory Channel(M)..." in View menu.
- Click " " in tool bar.
- Press [F6] key on the PC keyboard.
eDouble click, or right click the desired channel's "Select"
cell, then select "+ : Move to this CH" to select the desired
call channel.
• Click the desired call channel's "Select" cell, then press [Enter]
while pressing [Ctrl] key on the PC keyboard.
73
Double click the desired
channel's "Select" cell.
Select "+ : Move to this CH".
D D Selecting with the RC-24
q Push [CALL] to select call channel
• " " appears beside the channel number indication.
[CALL]
• Dial selection
w Rotate [DIAL] to select the desired call channel.
• Microphone's [UP]/[DN] switches can also be used for the selec-
tion.
• Keypad selection
wPush [F.INP•L] then push the appropriate digit key
([CS• •1], [MHz• •2] or [LOW•3]) to select the de-
sired call channel.
• Channel number indication disappear after pushing [F.INP•L].
• [CALL] selection
w Push [CALL] each time to select C1 to C3 in sequence.
LOW
" " appears.