Folding Down The Side Panels; Adjusting The Height Of The Forearm Support - Otto Bock Start M4 XXL Instructions For Use Manual

Use
28

7.6.1 Folding down the side panels

To make getting into the wheelchair easier and for transportation, the side panels can be folded down.
Swinging up the "standard", "stepped" and "height-adjustable" side panels
1) Push the locking mechanism (example: see fig. 30, item 1).
2) Swing the side panel back around the axis of rotation (example: see fig. 30, item 2).
Swinging back the "standard", "stepped" and "height-adjustable" side panels
1) Fold the side panel forwards.
2) The locking mechanism has to audibly engage in the side panel adapter.
INFORMATION: Verify the firm fit of the side panels in the side panel adapter.
30

7.6.2 Adjusting the height of the forearm support

"Standard" side panel, "stepped" desk side panel
Subsequent adjustments to the forearm support height may be made only by qualified personnel.
"Plug-on" side panel
1) Use a ballpoint pen or screwdriver to push in the counter-sunk locking button (see fig. 31).
2) Slide the side panel to the desired position.
CAUTION! The locking button is intentionally counter-sunk to prevent accidental operation. Always
use an object to press the locking button, never your fingers.
"Height-adjustable" side panel
The height of the forearm support can be set to various positions without the use of tools.
1) Push the locking button in the circular opening in to the stop (see fig. 32).
2) Slide the forearm support to the desired position.
3) Release the locking button. The forearm support locks into place automatically.
22
29
Start M4 XXL, Start M6 Junior